Suitable for use with clear or slightly soiled wastewaters containing small solids, strained water, rainwater,seepage and water pumped from underground, where high pumping rates are required. This electric pump is intended for both domestic and professional use.
1.5kW, 2.0hp, 415V without float switch, max hd 17m, max flow 690L/m, 2" BSPF outlet. Particle size 10x30mm.
3 phase pumps require contactor and overload.
2 Year Zenit Warranty
Zenit DR BluePRO Features
Ergonomic aluminium lifting and carrying handle, coated for excellent mechanical strength and corrosion resistance. Clip floatswitch adjustment.
Innovative cable gland system with twin O-rings to ensure maximum tightness.
Dry motor with thermal protections. Single-phase models with internal capacitor. Three-phase models with motor protection relay (option).
Two silicon carbide mechanical seals (2SiC), and V-ring in direct contact with the liquid.
Oil sump which guarantees longer mechanical seal lifetime, and is easily accessible thanks to a patented system to simplify maintenance procedures.
Breather which allows the air to be vented and ensure reliable pump priming even after long periods out of use.
Stainless steel intake strainer and diffuser plate (models 50, 75 and 100). Polypropylene intake strainer with cast iron diffuser plate and foot (models 150 and 200).
IECEx Zone 2 Approved
IECEx is the IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres. It uses quality assessment specifications that are based on International Standards prepared by the International Electrotechnical Commission (IEC).
Zenit Submersible Pumps exceed the new standard.
As one of the leading names in water treatment technologies, our Pumps have been awarded the IECEx – the international certification covering the use of equipment and services in explosive conditions.
So what is a ‘hazardous area’?
You can’t be too careful in hazardous areas – which is any space where flammable liquids, vapours, gases or combustible dusts could occur in high enough quantities to cause a fire or even an explosion.
- car parks
- truck stops
- vehicle workshops
- bus depots
- and garages
|Product Type||Submersible Pump|
|Approval||IECex Zone 2 Approved|
|Flow Range Category||f. 500 - 999 L/min|
|Flow Rate (L/min)||690 L/min|
|Float||Float Not Included|
|Kilo Watts||1.5 kW|
|Head Range Category||a. 0 - 39 m|
|Head (max)||17 m|
|Port Size Outlet||2" BSPF outlet|
|Particle Size||10X30 mm|