0.37kW, 0.5hp, 240V, max hd 40m, max flow 40L/m, 3 taps. Ports 1” BSPF In, 1” BSPM Out. 2.2 bar controller.
The Bianco 2.0 end suction peripheral turbine pump is an ideal device for low flow applications. They are especially suited for jacking pumps, commercial and industrial washdowns as well as domestic water boosting. They are also ideal for tank water transfer.
Suitable for clean water and in applications where there is flooded suction
The pump has the following features and benefits:
Automatic electronic pump control fitted and wired with plug and play leads so a licensed electrician is not required during installation.
Includes fully electronic pump controller for automatic pump starting, stopping and restart after power loss and water loss.
Run dry protection to prevent pump damage
Automatic electronic control has in-built check valve to prevent water backflow through the pump.
Corrosion resistant pump body and impeller to ensure pump durability
Cataphoresis1 treatment of pump body for rust prevention to ensure no water discoloration or suspended particles
High quality mechanical shaft seal and high quality bearings
240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.
1. Cataphoresis is an electrochemical coating process for metallic surfaces widely used in the industry due to its penetration and long life, either as a priming coat or finished paint for corrosion resistance.